Li-FT Provides Exploration Results from 2022 Exploration Program for the Pontax and Moyenne Projects
Vancouver, British Columbia--(Newsfile Corp. - November 15, 2022) - Li-FT Power Ltd. (CSE: LIFT) (FSE: WS0) ("Li-FT" or the "Company") is pleased to provide exploration results for the Pontax and Moyenne Projects located in the James Bay region of northern Quebec (Figure 1). During the summer of 2022, the Company completed a regional till geochemistry program within the Pontax and Moyenne Projects. (Figure 2). A total of 1,795 till geochemistry samples were collected within the Pontax Project and 850 till geochemistry samples were collected within the Moyenne Project. A total of 66 grab samples from boulders or outcrop were collected within the Pontax Project. The goal of the 2022 exploration programs was to confirm the presence of lithium pegmatite mineralization beneath extensive glacial sediment cover within the region. Results from the Pontax and Moyenne Projects are reported herein.
Till Geochemistry and Rock Sampling Results
Till geochemistry sampling over the Pontax Project has produced a Li-Cs-P- Nb -Ga-Mn-W-Mo +/- Ta-Sn-Rb anomaly with dimensions of approximately 8 by 7.5 kilometers (Figure 2). The Pontax Li Anomaly is spatially associated with a granodiorite, granite, and pegmatitic granite body on the southern margin of the Pontax Project which is interpreted to be a fertile granite (Figure 3).
66 rock samples were collected on the Pontax Project from boulders and outcrop. The best sample assayed 0.41% Li2O from an amphibolite unit at the contact of a pegmatite dyke (Figure 3).
Till geochemistry sampling over the Moyenne Project has produced a number of small, discontinuous Li +/- pathfinder anomalies.
Francis MacDonald, CEO of Li-FT comments, "The till geochemistry results from the Pontax Project are intriguing. The 60 square kilometers of lithium anomalism in till could represent a number of different things - it could be caused by lithium pegmatites concealed by glacial sediments or it could represent the signature of a fertile granite. We will pursue this anomaly during the next field season to determine if the results represent buried lithium pegmatite mineralization."
Figure 1 - Location map of the Rupert, Moyenne, and Pontax Projects, James Bay region, northern Quebec
To view an enhanced version of Figure 1, please visit:
Discussion of Results
The Pontax Li Anomaly is located within the Anatacau-Pivert greenstone belt, a thin band of supracrustal rocks that occurs between the La Grande granitoid-gneiss terrane to the east and the Nemiscau sub-province to the west. The Li -Cs-P-Nb-Ga-Mn-W-Mo +/- Ta-Sn-Rb anomaly is located to the north of a granitic pluton described as being variably pegmatitc. The location of geochemical anomalism seems to be spatially related to the contact between this variably pegmatitic granite and supracrustal rocks.
Till geochemistry percentiles for anomalous elements were calculated from the 2021 regional till sampling program at the Rupert Project. These percentiles were used for the Pontax and Moyenne Projects due to the even grid spacing that was used at the Rupert Project which limits the skewing of data by oversampled anomalous areas (see press release dated November 9, 2022).
Figure 2 - Lithium till geochemistry results from 2022 Pontax and Moyenne Projects
To view an enhanced version of Figure 2, please visit:
The Pontax Project is within an area that was affected by the marine incursion of the Tyrell Sea at the end of the last glaciation. Topographic lows are infilled with glaciomarine sediments and topographic highs usually have outcropping till. Till on topographic highs may have been reworked by the Tyrell Sea, which could cause variability in till geochemistry results.
The Moyenne Project has more discreet and discontinuous geochemical anomalies than the Pontax and Rupert Projects (see press release dated November 9, 2022 for Rupert till results). The Company will design a modest follow-up exploration program to screen low-level anomalism in the Moyenne Project area.
Figure 3 - Pontax Li Anomaly showing a spatial relationship between the contact of a variably pegmatitic granite and geochemical anomalism
To view an enhanced version of Figure 3, please visit:
Exploration Program Details
During summer of 2021, a LIDAR survey was completed over the Pontax and Moyenne Projects and was used to produce an interpreted surficial geology map. Till geochemistry samples were planned on topographic highs on a 400 by 100 meter grid spacing due to extensive glaciomarine clay infilling topographic lows. One kilogram of sediment was collected by Dutch auger from the C-horizon at a depth of 20-100 centimeters. Samples were sieved to -63 microns, digested in a 4-acid solution then sent for ICP-MS analysis. A 30 gram split was taken for Au analysis by aqua regia - ICP-MS.
Figure 4 - Pontax Li Anomaly vs. the Whabouchi lithium deposit
To view an enhanced version of Figure 4, please visit:
Quality Assurance, Quality Control and Sampling Protocols
Till geochemistry samples were collected between 20 - 80 centimeters below surface from the C-horizon of glacial till. Approximately one kilogram of material was collected from each sample site and shipped to Bureau Veritas ("BV") in Timmins, Ontario for preparation. Samples were prepared for analysis according to BV method SS230 whereby individual samples were sieved to isolate the -230 mesh (-63 microns) fraction. Samples were analysed at BV in Vancouver, British Columbia with BV methods MA250 (4-acid digestion with ICP-MS finish) for multi-element data (0.25g split is heated in HNO3, HClO4 and HF to fuming and taken to dryness. The residue is dissolved in HCl), and BV method AQ130 (aqua regia with ICP-MS finish) for gold analysis (30 grams of material digested in aqua regia).
Rock grab samples were collected from boulders or outcrop. Between 0.5 and 2 kilograms of material was placed in a plastic bag and submitted to BV in Timmins, Ontario for preparation. Samples were prepared for analysis according to BV method PRP70-250, whereby 250 grams of material is crushed, split and pulverized to isolate the -200 mesh (-74 micron) fraction. 0.25 grams of this material was analysed using BV method MA250 (see description above) for multi-element analysis. 30 grams of material was analysed using BV method FA430 (lead collection fire assay with AAS finish).
Don Cummings, P.Geo. (OGQ # 2183), independent consultant to Li-FT Power Ltd., Qualified Person under NI 43- 101 on standards of disclosure for mineral projects, has reviewed and approved the technical content of this release.
For further information, please contact:
Cautionary Statement Regarding Forward-Looking Information
Certain statements included in this press release constitute forward-looking information or statements (collectively, "forward-looking statements"), including those identified by the expressions "anticipate", "believe", "plan", "estimate", "expect", "intend", "may", "should" and similar expressions to the extent they relate to the Company or its management. The forward-looking statements are not historical facts but reflect current expectations regarding future results or events. This press release contains forward looking statements. These forward-looking statements are based on current expectations and various estimates, factors and assumptions and involve known and unknown risks, uncertainties and other factors.
Forward-looking statements are not a guarantee of future performance and involve risks, uncertainties and assumptions which are difficult to predict. Factors that could cause the actual results to differ materially from those in forward-looking statements include the continued availability of capital and financing, and general economic, market or business conditions, including the effects of COVID-19. Forward-looking statements contained in this press release are expressly qualified by this cautionary statement. These statements should not be read as guarantees of future performance or results. Such statements involve known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to be materially different from those implied by such statements. Although such statements are based on management's reasonable assumptions, there can be no assurance that the statements will prove to be accurate or that management's expectations or estimates of future developments, circumstances or results will materialize. The Company assumes no responsibility to update or revise forward-looking information to reflect new events or circumstances unless required by law. Readers should not place undue reliance on the Company's forward-looking statements.
Neither the Canadian Securities Exchange (the "CSE") nor its Regulation Services Provider (as that term is defined in the policies of the CSE) accepts responsibility for the adequacy or accuracy of this release.
This news release does not constitute an offer to sell or a solicitation of an offer to buy any of the securities in the United States of America. The securities have not been and will not be registered under the United States Securities Act of 1933 (the "1933 Act") or any state securities laws and may not be offered or sold within the United States or to U.S. Persons (as defined in the 1933 Act) unless registered under the 1933 Act and applicable state securities laws, or an exemption from such registration is available.
THIS NEWS RELEASE IS NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES FOR DISSEMINATION IN THE UNITED STATES
1 Mineral resource estimate from 43-101 technical report titled “NI 43-101 TECHNICALREPORT FEASIBILITY STUDY ON THE WHABOUCHI LITHIUM MINE AND SHAWINIGAN ELECTROCHEMICAL PLANT” dated February 21, 2018, authored by Dupere et al. Resource quoted is within Table 1.4 – Whabouchi Deposit in Pit Mineral Resource Estimate: Measured – 16,953,000 tons at 1.57% Li2O, Indicated –20,403,000 tons at 1.41% Li2O (Cut-off grade of 0.30% Li2O)
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/144240