Royal Road Provides Drilling Update from Its Caribe Gold Discovery; Nicaragua

Toronto, Ontario--(Newsfile Corp. - August 3, 2022) - Royal Road Minerals Limited (TSXV: RYR) ("Royal Road" or the "Company") is pleased to provide a drilling update from its Caribe gold discovery in northeastern Nicaragua.

The Caribe project forms a part of the Company's Strategic-Alliance agreement (see press release; September 6, 2017) with Hemco Mineros Nicaragua ("Hemco" a subsidiary of Mineros S.A., TSX: MSA) and is located in the highly prospective "Golden Triangle" of northeastern Nicaragua. Royal Road Minerals is operator of the Strategic Alliance.

Royal Road's exploration team discovered the Caribe project during reconnaissance exploration in February of 2018. Outcrop at Caribe is concealed under soil and saprolite cover and there is no previous record of mining or mineralization in the area. In 2019, Royal Road and Hemco completed an initial 4-hole, exploratory drilling program at Caribe which returned promising results for gold. A follow-up diamond drilling program commenced at the project during August of 2020 and has returned encouraging results including CB-DDH-025, 207.45 meters at 1.1 grams per tonne, CB-DDH-016, 100.45 meters at 1.0 gram per tonne; CB-DDH-017, 90 meters at 1.0 gram per tonne and CB-DDH-015, 63 meters at 1.0 gram per tonne gold (see Press Releases November 10, 2020, February 11, 2021, March 17, 2021, September 1, 2021 and Table 1).

Diamond drilling has advanced as a combination of infill and step-out exploratory drilling in order to resolve geometry within the known breccia body (carbonate-sericite zone) and test for a possible intrusive source to later-stage, pyrite, chalcopyrite and molybdenite mineralized hydrothermal breccia bodies.

Significant new results from infill diamond drilling include:

CB-DDH-039 68 meters at 0.9 grams/tonne gold
CB-DDH-040104 meters at 0.8 grams/tonne gold; and
66 meters at 1.3 grams/tonne gold
CB-DDH-044 114 meters at 1.0 grams/tonne gold

(not true width and the company does not have sufficient information to make a determination of the true widths of the drill hole intersections)

Figure 1

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4008/132683_figure%201.jpg

Drill hole CB-DDH-040 in particular has identified significant further gold mineralization within the carbonate-sericite zone at-depth (see Table 1 and Figure 1) and interestingly beyond this zone and within mafic lavas that were previously interpreted as basement to the mineralizing system at Caribe. Step-out exploratory drill holes have intersected native copper, copper oxides and anomalous gold (see Figure 1) but have not, as yet, identified a possible copper and gold mineralized intrusive source.

In September 2021, the Company commenced a program of grid-based scout reverse-circulation drilling at the project. The program utilizes a small, low-impact, man-portable reverse-circulation (RC) drilling rig which drills through soil and saprolite cover down to the first 2-3 meters of weathered rock where a sample is taken for analysis. Results have now been returned for 312 vertical scout-RC drill holes averaging approximately 18m in depth (see Figure 1).

Results received to-date imply that the gold mineralized system remains open for a further approximately 300 meters towards the west and southwest and suggests a broad and significant copper anomaly towards the east (Figure 1). Interestingly, the newly identified gold mineralization located to the west of the project area, is hosted in the footwall to a major crustal scale fault-zone (see Figure 1B), which was previously assumed to be barren. 25m-spaced infill scout-RC drilling is planned in this newly identified area in order to better constrain geometry prior to diamond drilling.

"Infill drilling in the main breccia body at Caribe is further extending gold mineralization to depth and the Scout-RC program is fully functioning and identifying some interesting new targets for further potential gold and possibly copper mineralization at the project," said Tim Coughlin, Royal Road's President and CEO "New discoveries are full of new surprises, Caribe is reminding us of the power of observation and the value of an open mind".

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

The information in this news release was compiled, reviewed and verified by Dr. Tim Coughlin, BSc (Geology), MSc (Exploration and Mining), PhD (Structural Geology), FAusIMM, President and CEO of Royal Road Minerals Ltd and a qualified person as defined by National Instrument 43-101. Royal Road Minerals employees are instructed to follow standard operating and quality assurance procedures intended to ensure that all sampling techniques and sample results meet international reporting standards. More information can be found on Royal Road Minerals web site at www.royalroadminerals.com

Quality Assurance and Quality Control:

Diamond drill core is cut in half over 1-meter downhole intervals using a core saw. Samples are prepared and assayed by independent and ISO accredited laboratories of Bureau Veritas Minerals (BVM) and their local subsidiaries. Bagged 1-meter samples are collected from site and delivered to BVM sample preparation laboratories in Managua. Samples are prepared using the BVM codes PRP70-250 plus PUL85, where samples are crushed to 70% less than two millimeters, a riffle split of 250 grams is collected and then pulverized to better than 85 per cent passing 75 microns. Prepared sample pulps are then sent for analysis to BVM labs in Vancouver Canada. Gold is analyzed by fire assay with an atomic absorption finish and a measurement range of 0.005 to 10 ppm. Samples over 10-ppm gold are re-analyzed by fire assay with a gravimetric finish. Multielement concentrations are analyzed by four-acid digestion and inductively coupled plasma mass spectrometer. Samples over 10,000ppm Cu, Zn, Pb or Mn and 200 ppm W, are re-analyzed with four acid digestion and Inductively Coupled Plasma Emission Spectrometer (ICP-ES). Commercially prepared standards (gold-copper pulps), blanks (pulps and coarse chips) and field duplicates are inserted into the sample stream by Royal Road Minerals for a total of 15% QA/QC to ensure sample precision. In the case of duplicate analyses of a sample, the average of both analyses is used as the final reported value. Unless otherwise stated, gold grades are not capped for calculation of length-weighted averages.

RC chip samples are taken every meter after having entered 2-3 meters within the saprock-fresh rock boundary. Samples are collected from the drilling site and dried at the core yard. Where dry sample weights exceed 4.5Kg they are split. Bagged 1-meter samples are collected from site and delivered to the BVM sample preparation laboratory in Managua. Samples are prepared using BVM codes PRP70-250 plus PULSW where a riffle split of 250 grams is collected and then pulverized to better than 85 per cent passing 75 microns. Sample pulps are then sent for analysis to BVM labs in Vancouver Canada. Gold is analyzed by fire assay with an atomic absorption finish and a measurement range of 0.005 to 10 ppm. Samples over 10 ppm gold are re-analyzed by fire assay with a gravimetric finish. Multielement concentrations are analyzed by four-acid digestion and inductively coupled plasma mass spectrometer. Samples over 10,000ppm Cu, Zn, Pb or Mn and 200 ppm W, are re-analyzed with four acid digestion and Inductively Coupled Plasma Emission Spectrometer (ICP-ES). Commercially prepared standards (gold-copper pulps), blanks (pulps and coarse chips) and field duplicates are inserted into the sample stream by Royal Road Minerals for a total of 15% QA/QC to ensure sample precision. In the case of duplicate analyses of a sample, the average of both analyses is used as the final reported value. Unless otherwise stated, gold grades are not capped for calculation of length-weighted averages.

Cautionary statement:

This news release contains certain statements that constitute forward-looking information and forward-looking statements within the meaning of applicable securities laws (collectively, "forward-looking statements") including statements relating to the Hemco-Mineros Alliance and those describing the Company's future plans and the expectations of its management that a stated result or condition will occur. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the Company, or developments in the Company's business or in the mineral resources industry, or with respect to the Hemco-Mineros Alliance, to differ materially from the anticipated results, performance, achievements or developments expressed or implied by such forward-looking statements. Forward-looking statements include all disclosure regarding possible events, conditions or results of operations that is based on assumptions about, among other things, future economic conditions and courses of action, and assumptions related to government approvals, and anticipated costs and expenditures. The words "plans", "prospective", "expect", "intend", "intends to" and similar expressions identify forward looking statements, which may also include, without limitation, any statement relating to future events, conditions or circumstances. Forward-looking statements of the Company contained in this news release, which may prove to be incorrect, include, but are not limited to, those related to the Hemco-Mineros Alliance, Hemco-Mineros, and the Company's plans exploration plans.

The Company cautions you not to place undue reliance upon any such forward-looking statements, which speak only as of the date they are made. There is no guarantee that the anticipated benefits of the Hemco-Mineros Alliance and the Company's business plans or operations will be achieved. The risks and uncertainties that may affect forward-looking statements include, among others: economic market conditions, anticipated costs and expenditures, government approvals, and other risks detailed from time to time in the Company's filings with Canadian provincial securities regulators or other applicable regulatory authorities. Forward-looking statements included herein are based on the current plans, estimates, projections, beliefs and opinions of the Company management and, in part, on information provided to the Company by Hemco-Mineros, and, except as required by law, the Company does not undertake any obligation to update forward-looking statements should assumptions related to these plans, estimates, projections, beliefs and opinions change.

For further information please contact:

Dr. Timothy Coughlin
President and Chief Executive Officer
+44 (0)1534 887166
info@royalroadminerals.com

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/132683