New Finding: NEO's Silicon Technology Demonstrates Performance Effectiveness on Low-Cost, Metallurgical-Grade Silicon Microparticles

July 05, 2021 9:00 AM EDT | Source: NEO Battery Materials Ltd.

Vancouver, British Columbia--(Newsfile Corp. - July 5, 2021) - NEO Battery Materials Ltd. (TSXV: NBM) (OTC: NBMFF) ("NEO" or the "Company") is pleased to announce that, in the latest test, NEO's silicon nanocoating technology has successfully achieved to demonstrate effectiveness on low-cost, metallurgical grade silicon particles of micron-size (D50: 2.9μm), enabling a 6-minute (10 C-Rate) charge/discharge level without major capacity loss in the cell.

Following the previous successful integration of NEO's silicon (Si) nanocoating technology in Si nanoparticles ranging from 50 nm to 100 nm, Dr. J. H. Park, Director and Chief Scientific Advisor of NEO, is pleased to announce that the additional capability to exhibit substantial performance effectiveness with metallurgical grade, micron-sized (μm) Si particles is a step-change for NEO due to the significant cost reductions from the Si microparticle range and the flexibility of applying NEO's technology onto various Si particle sizes. On average, Si microparticles are 8 to 10 times cheaper compared to Si nanoparticles.

Cost Advantage of Metallurgical-Grade Silicon Microparticles

Despite retaining more than a 10 times higher specific capacity than graphite, Si material easily loses its energy retention and storage capacity due to high volume expansion and particle pulverization after minimal charging cycles. Nanosized Si could minimize its gradation pathway and partially solve this shorter life cycle problem, but the expensive cost of Si nanoparticles serves as a major bottleneck and issue for battery manufacturers and electric vehicle (EV) companies.

Due to more efficient process times and lean, inexpensive manufacturing environments, metallurgical-grade Si microparticles are highly cost-effective compared to Si nanoparticles, but performance issues at the microparticle level have hindered the widespread adoption.

"NEO is hence targeting on a two-track to develop and refine its technology on both Si microparticles and nanoparticles. The results shown in this test emphasize the potency of NEO's Si nanocoating technology that can be applied to silicon with various particle sizes. Our technology's flexibility of application, performance, and price competitiveness serve as the most crucial value propositions," commented Spencer Huh, President and CEO of NEO.

Cannot view this image? Visit: https://orders.newsfilecorp.com/files/4661/89362_4d2112fce490aa5f_001.jpg

Graph 1

To view an enhanced version of this graph, please visit:
https://orders.newsfilecorp.com/files/4661/89362_4d2112fce490aa5f_001full.jpg

Regarding the test results, Dr. Park also commented, "Our unique solution one-pot process integrates micron-sized silicon particles uniformly coated by a nanometer-thick magic coating layer, which substantially outperforms the rate-capability as shown below. From the data of 10 C-rate, which represents a 6-minute charge/discharge of the cells, we can confirm several minute-level ultra-fast charging/discharging without major capacity loss from our technology."

Mr. Huh added, "NEO's Si anode will be a simple yet unique solution for the production of low-cost Si anode with high-capacity battery electrodes. The Company will be moving forward to test its micron-sized silicon anodes through third-party laboratory tests and direct transfers to companies in the battery supply chain that have signed NDAs with us."

About NEO Battery Materials Ltd.

NEO Battery Materials Ltd. is a Vancouver-based resource company focused on battery metals and materials. The Company has staked new mining claims in Golden, BC, along a strike with a quartzite bed, targeting silica in the quartzites for a total of 467 hectares. NEO is also focusing on developing silicon anodes, which provide improvements in capacity and efficiency over lithium-ion batteries using graphite in their anode materials. The Company intends to become an integrated silicon producer and anode materials supplier to the electric vehicle industry. For more information, please visit the Company's website at: https://www.neobatterymaterials.com/.

On behalf of the Board of Directors
Spencer Huh
President and CEO
604-697-2408
shuh@neobatterymaterials.com

This news release includes certain forward-looking statements as well as management's objectives, strategies, beliefs and intentions. Forward looking statements are frequently identified by such words as "may", "will", "plan", "expect", "anticipate", "estimate", "intend" and similar words referring to future events and results. Forward-looking statements are based on the current opinions and expectations of management. All forward-looking information is inherently uncertain and subject to a variety of assumptions, risks and uncertainties, including the speculative nature of mineral exploration and development, fluctuating commodity prices, the effectiveness and feasibility of technologies which have not yet been tested or proven on a commercial scale, competitive risks and the availability of financing, as described in more detail in our recent securities filings available at www.sedar.com. Actual events or results may differ materially from those projected in the forward-looking statements and we caution against placing undue reliance thereon. We assume no obligation to revise or update these forward-looking statements except as required by applicable law.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

THIS NEWS RELEASE IS NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES OR DISSEMINATION IN THE UNITED STATES

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/89362

info