Los Andes Copper Announces 732m at 0.51% Copper Equivalent Mineralization in Initial Drilling Results at Vizcachitas Copper Project, Chile Detailed Table Update
February 10, 2022 7:17 AM EST | Source: Los Andes Copper Ltd.
Vancouver, British Columbia, London, United Kingdom and Santiago, Chile--(Newsfile Corp. - February 10, 2022) - Los Andes Copper Ltd. (TSXV: LA) (OTCQX: LSANF) ("Los Andes", "LA" or the "Company") reports excellent initial results from Hole CMV-001B and aggregate of 732 meters ("m") with estimated average grade of 0.51% Copper Equivalent. The average grades include 0.46% (corrected from 0.51%, all other information correct) Copper and 160 parts per million ("ppm") Molybdenum from 64m to 820m down the hole. Assay grades for the interval reported for silver are still pending, as are the values from 820m down the hole to end of hole at 1,265.15m.
Drilling is continuing with four drill rigs at Vizcachitas with the objectives of expanding the resources within the open pit designs and to explore the deposit below the boundaries of the open pit designed in the Preliminary Economic Assessment, (PEA, 2019).
The current Phase 1 drill program will expand from four to five drill rigs with 18,000m of drilling planned. The full Phase 1 drill program consists of 30,000m of drilling with potential for further expansion.
R. Michael Jones, P.Eng, CEO of Los Andes Copper, commented: "Hole CMV-001B is important for two reasons: firstly, it demonstrates and confirms the scale of the good grades at Vizcachitas starting from the collar in rock; secondly, the hole is near the western limit of the resources and shows clear potential for further resources to the west. We look forward to the assays for this hole below the current pit designs.
"Though we are still awaiting assay grades for the interval reported for silver, it is important to note that silver typically reports to approximately 1% of the value on the deposit.
"The ongoing drilling program is testing areas in and below the PEA shell. There are several large areas that are taken as waste inside the previous pit designs that are classified as waste due to having no, or very limited drill testing. The historical fragmented land and permit position resulted in areas within the PEA pit not having any proper drill testing. The current drill program has many opportunities to offset known good grade holes with adjacent or deeper drilling into areas with no drill testing.
"Converting waste blocks inside the pit design to resources would add value and as the deposit and grade profile changes, so too does the opportunity for an improved new mine plan."
"The geological team at Vizcachitas has been expanded to several senior geologists with decades of experience on the largest porphyry copper deposits in Chile. The Vizcachitas project is being explored for the first time in recent history with the ability to drill across the whole property. The controls of copper and molybdenum mineralization are being modelled by the new team collaborating and having the ability to explore the full project mineralizing system.
"We look forward to reporting further drill results, as we unlock the potential of this world-class deposit, in the weeks and months ahead."
Drilling results
The details of Hole CMV-001B are shown in the table below. Unfortunately, a zone of lost core at 156m to 180m adjacent to high grades resulted in this area not being representative and properly assayed. These meters are not included in the overall average at this time. A twin hole to Hole CMV-001B will be drilled and these meters will be assayed to add to the overall grade thickness assessment. The final average from 64m to End of Hole will be reported as assays are available.
The area immediately west of Hole CMV-001B is largely open and drilling is underway with two machines.
Table | Meters | Cu % | Mo ppm | Ag -Pending | CuEq % |
64-156 | 92 | 0.57 | 63 | 0.59 | |
156-180 - lost core | |||||
180 - 820 m | 640 | 0.44 | 174 | 0.50 | |
Average of | 732m | 0.46 % Cu | 160 ppm Mo | 0.51 % CuEq |
* Copper equivalent grade has been calculated using the following calculation: Cu Eq (%) = Cu (%) + 3.33 x Mo (%) using the metal prices: 3.00 USD/lb Cu, 10.00 USD/lb Mo. No allowance for metallurgical recoveries has been considered. These are the same reference prices as in reporting of 2019 PEA. This means that the reported intercepts can be compared directly with the results published in the PEA. Approximate relative value on the PEA pricing is 93% Cu, 6% Mo and 1% silver.
All thicknesses from the drill hole intersections are down-hole drilled thicknesses. True widths will be estimated as the deposit model is updated and information available.
The ongoing drilling program is targeting areas on all sides of the current resource, including an area in the southern region where previous drilling resulted in resource grades at approximately 150 meters.
About Los Andes Copper Ltd.
Los Andes Copper Ltd. is an exploration and development company with an 100% interest in the Vizcachitas Project in Chile. Los Andes Copper Ltd. is listed on the TSX-V under the ticker: LA.
The Project is a copper-molybdenum porphyry deposit, located 120 kilometres north of Santiago, in an area of very good infrastructure. The Company's Preliminary Economic Assessment (the "PEA"), delivered in June 2019, highlights that the Project has a post tax NPV of $1.8 billion and an IRR of 20.77%, based on a $3 per pound copper price. It also has a Measured Resources of 254.4 million tonnes having a grade of 0.439% copper and Indicated Resource of approximately 1.03 billion tonnes having a grade of 0.385% copper. Mineral resources that are not mineral reserves do not have demonstrated economic viability. Please refer to the technical report dated June 13, 2019, with an effective date of May 10, 2019 and titled "Preliminary Economic Assessment of the Vizcachitas Project", prepared by Tetra Tech.
The PEA is preliminary in nature, it includes inferred mineral resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the PEA will be realized.
Qualified Person ("QP") and Quality Control and Assurance
Antony Amberg CGeol FGS, the Company's Chief Geologist, is the qualified person who has reviewed and approved the scientific and technical information contained in this news release. The QP has validated the data by, supervising the sample collection process, through chain of custody records and inspecting the detailed technical data and quality control and assurance information.
Los Andes Copper has a strict Quality Assurance and Quality Control (QA QC) protocol, which is consistent with industry best practices. There is a strict chain of custody from the project site to laboratory via the Company's core cutting facility near to San Felipe. The QA QC protocol includes the insertion of field duplicates, coarse duplicates, pulp duplicate, pulp and coarse blanks and Certified Reference Materials supplied by Ore Research and Exploration, Australia.
The core was analysed in the Santiago laboratory of the Geo Assay Group. The Geo Assay Group is a leading Chilean analytical laboratory providing analytical services to multinational companies in Chile. The samples were prepared in the laboratory's fully automated robotic sample preparation area. Using a 4-acid digestion all samples were analysed for copper and molybdenum using Atomic Absorption.
For more information please contact:
R. Michael Jones, P.Eng CEO
+44 203 4407982
Blytheweigh, Financial PR
Megan Ray
Rachael Brooks
Tel: +44 207 138 3203
E-Mail: info@losandescopper.com or visit our website at: www.losandescopper.com
Follow us on Twitter @LosAndesCopper
Follow us on LinkedIn Los Andes Copper Ltd
Certain of the information and statements contained herein that are not historical facts, constitute "forward-looking information" within the meaning of the Securities Act (British Columbia), Securities Act (Ontario) and the Securities Act (Alberta) ("Forward-Looking Information"). Forward-Looking Information is often, but not always, identified by the use of words such as "seek", "anticipate", "believe", "plan", "estimate", "expect" and "intend"; statements that an event or result is "due" on or "may", "will", "should", "could", or might" occur or be achieved; and, other similar expressions. More specifically, Forward-Looking Information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company, or industry results, to be materially different from any future results, performance or achievements expressed or implied by such Forward-Looking Information. Such Forward Looking Information includes, without limitation, the timing of and ability to obtain TSX-V and other regulatory approvals and the prospects, details related to and timing of the Vizcachitas Project. Such Forward-Looking Information is based upon the Company's assumptions regarding global and Chilean economic, political and market conditions and the price of metals and energy and the Company's production. Among the factors that have a direct bearing on the Company's future results of operations and financial conditions are changes in project parameters as plans continue to be refined, a change in government policies, competition, currency fluctuations and restrictions and technological changes, among other things. Should one or more of any of the aforementioned risks and uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from any conclusions, forecasts or projections described in the Forward-Looking Information. Accordingly, readers are advised not to place undue reliance on Forward-Looking Information. Except as required under applicable securities legislation, the Company undertakes no obligation to publicly update or revise Forward-Looking Information, whether as a result of new information, future events or otherwise.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/113385