M3 Metals Identifies Significant High-Grade and Widespread Gold Values at Mohave

May 06, 2020 3:05 AM EDT | Source: M3 Metals Corp.

Vancouver, British Columbia--(Newsfile Corp. - May 6, 2020) - M3 Metals Corp. (TSXV: MT) (FSE: XOVN.F) ("M3 Metals" or the "Company") is pleased to report that its initial sampling program at the Mohave Mine Gold Project ("Mohave" or the "Property") has identified high-grade gold values over an area of approximately 10 square kilometres (see Figure 3 below). Gold mineralization has been identified across the entire project area and is associated with quartz-calcite veins, breccia, quartz and/or calcite sheeted veins, and stockworking. Samples ranged up to 78 gpt (grams per tonne) gold over 1.5 metres from surface chip sampling (See Figure 3 and Table 1 below). Results grading above 3 gpt are outlined in the Table 1. below, the full list of results is available on the Mohave Project page on M3 Metals website at https://www.m3metalscorp.com/projects/gold-project/mohave-gold-mine-project.

Appreciable gold values were detected in almost every zone sampled during this initial program which may collectively be a part of a large and robust low-sulfidation, epithermal system. The current geological model at the Mohave project indicates that the epithermal gold system was emplaced into an evolving volcanic/intrusive complex within a north-trending corridor undergoing extreme extension. Evidence of ore-fluid boiling is widely observed and locally well-developed lattice texture (bladed calcite) is present. Images from the program including sample mineralization style and textures are available on the Mohave project page on M3 Metals website https://m3metalscorp.com/projects/gold-project/mohave-gold-mineproject/initiail-sampling-program-photos​.

Three styles of mineralization were observed during this initial program:

  • Compact intra-mineral tectonic breccia developed along low-angle faults;
  • Low-angle quartz-chalcedony-calcite veins and breccia (banding and lattice texture are widespread) developed in extensional zones; and
  • Quartz-chalcedony sheeted veins and stockwork (mostly in porphyritic dacite flows) surrounding the above structural lenses or 'damage zones'.
  • When all three mineral styles are observed together, the overall mineralized package may attain in excess of 50 meters in width.

M3 Metals is currently planning a follow up program that will continue to prioritize drilling targets by focusing on areas with the greatest volume potential and will better define the full extent of mineralized zones. This will include efforts to identify new undiscovered zones that may exist below the surface. Field observations and consideration of historic drill data support extensions of surface mineralization to depth or gold zones blind to the surface.

Robert Johansing, Economic Geologist, M.Sc., Q.P., comments "Mineralization and tectonism at the Mohave Project likely overlapped and occurred in multiple stages, creating numerous environments for gold deposition. At many of the sites only a portion of the mineralized package were sampled and require additional sampling to determine their full extent. The results presented below [see Table 1] should allow Phase 2 sampling to focus on areas that contain significant gold values within broadly mineralized, unsampled packages and in areas where the geologic environment is suggestive of significant tonnages".

Adrian Smith, President of M3 Metals comments "The initial results from the Mohave are significant and identify many horizons within broad zones containing abundant oxide gold mineralization that have not been properly documented. We see a clear path forward at the Mohave Project through continued exploration to defining a significant resource and through to production".


Cannot view this image? Visit: https://orders.newsfilecorp.com/files/5509/55422_55422_7ea4254df4ea8bbe_002crop.jpg

Figure 1: Sub-horizontal vein breccia composed of massive chalcedony vein and veined, silicified fragments cemented by banded, quartz-calcite veins and veinlets. Sample Nos. 0016 & 0017 - 3.0m @ 5.12 gpt Au.

To view an enhanced version of Figure 1, please visit:
https://orders.newsfilecorp.com/files/5509/55422_7ea4254df4ea8bbe_002full.jpg

 

Cannot view this image? Visit: https://orders.newsfilecorp.com/files/5509/55422_55422_7ea4254df4ea8bbe_001crop.jpg

Figure 2: Several meters of strong calcite > quartz sheeted veinlets; Sample No. 0166 (lower center of photo) contained 1.5 meters @ 4.85 ppm Au; north side of Epidote Zone.

To view an enhanced version of Figure 2, please visit:
https://orders.newsfilecorp.com/files/5509/55422_7ea4254df4ea8bbe_001full.jpg

 

Cannot view this image? Visit: https://orders.newsfilecorp.com/files/5509/55422_7ea4254df4ea8bbe_003.jpg

Figure 3: Location Map of Rock Chip and Grab Samples from M3 Metals Initial Sampling Program

To view an enhanced version of this graphic, please visit:
https://orders.newsfilecorp.com/files/5509/55422_7ea4254df4ea8bbe_003full.jpg

Table 1. Rock Chip and Grab Samples from M3 Metals Initial Sampling Program (>3gpt gold)

May 2020 Samples
UTM WGS 84 Z11


Sample
Number
AreaSample
Type
EastingNorthingSample
Width (meters)
Gold
Au (gpt)
Silver
Ag (gpt)
0003N. Klondyke Grab7233233934174grab3.237.1
0006KlondykeChip72334639341601.578.1115
0007KlondykeChip72334739341591.55.4328.1
0009KlondykeChip72339039341851.05.281.5
0012N. Klondyke Chip72343139343532.03.8420.7
0014KlondykeChip72352939341243.05.061.7
0016KlondykeChip72334639341431.55.3911.9
0017KlondykeChip72334639341431.54.858.6
0018S. KlondykeChip72361939337212.08.565.2
0020Jim & JerryChip72370739351202.010.5537.5
0021Jim & JerryFloat7237233935115grab21.276.4
0023Jim & JerryChip72372939351201.512.8519.4
0029ScoutChip72331539351802.03.823.9
0030ScoutChip72331439351772.03.84.7
0031ScoutChip72334439351682.03.833.4
0032ScoutChip72334239351641.23.858.4
0042S. ScoutChip72325639348381.13.7815.5
0048Jim & JerryChip7237113935102grab13.235.4
0054Jim & JerryChip72375739352111.65.875
0055Golden RamChip72371039355660.96.068.9
0062Golden RamFloat7236443935552grab3.341.8
0063Golden RamGrab7236073935590grab8.334
0065Golden RamGrab7235823935572grab4.422.8
0068West Jim & JerryChip72352439353641.53.268.5
0069West Jim & JerryChip72352439353622.05.1613
0079ScoutChip72330839352051.06.735.8
0080ScoutChip72328139352360.83.262.2
0084OrphanGrab7231423935133grab3.983.7
0085OrphanChip72314139351381.66.663.4
0086OrphanChip72315639351421.08.55.7
0087OrphanChip72315239351441.114.256.8
0090Lower ScoutChip72324039351562.04.5831.2
0092Golden DoorChip72294439352412.013.117.6
0094Golden DoorChip72293539351891.518.340.8
0097Golden DoorChip72284539352401.33.683.4
0101Dixie MineChip72331439324050.59.224.8
0112Dixie QueenGrab7242433932409grab6.9148.7
0113Dixie QueenChip72426039324410.24.9258.4
0116Middle DixieFloat7237713932385grab4.271.6
0119Dixie QueenChip72411839325210.53.4257.5
0120Dixie QueenGrab7241193932520grab7.5431.9
0126Middle DixieChip723852393258113.2757.8
0129JamieChip72474839331840.85.070.8
0131JamieGrab7247433933184grab20.314.6
0134JamieChip72471139330740.510.051.1
0135JamieChip72470239331221.38.982.3
0136JamieGrab7246873933133grab20.58.8
0137RingboltChip72352939327910.78.172.8
0144Klondyke MineChip723308393387618.088.4
0145Klondyke MineChip723253393390414.46.8
0158N. ApexGrab7233583934378grab8.7416.8
0159N. ApexChip72337539343530.614.3524.3
0166EpidoteChip72389839348221.54.851.6
0169EpidoteChip72395339349110.93.652.3
0179Red Gap (lower)Grab7223233935251grab420.8
0183Red Gap (upper)Chip72243139353791.26.0427.6
0185Red Gap (upper)Chip72248639353841.68.9122.3
0192Cottonwood Rd.Chip72415739314740.56.262
0193Cottonwood Rd.Grab7240743931541grab4.9710.3
0194Cottonwood Rd.Chip72408739315572.54.758.9
0195Cottonwood Rd.Grab7241233931501grab34.157.4

 

Note: Chip sample widths were measured approximately perpendicular to strike of veining and represent approximate true widths, or, represent a portion of approximate true widths from wider zones that either constitute multiple samples or wider zones that could not be completely sampled due to exposure or physical limitations or scope of program. Also, the samples labelled as "grab" are selected samples and are not necessarily indicative of the mineralization hosted on the property. The Company plans to better determine the full width and extent of the mineralized zones in additional work programs.

The analytical results from the sampling program are summarized (gold-silver) below. A few general observations are presented and relate to the overall project area:

  • Table 1 (above) presents the samples containing in excess of 3 gpt Au (n= 61 or 32%).

  • Gold values for Phase 1 (192 samples) averaged 3.27 gpt Au and ranged between 5 ppb (Low Limit of Detection) and 78.1 gpt Au;

  • Silver values averaged 7.88 gpt with a maximum value of 115 gpt Ag;

  • the Gold - Silver ratio (Ag:Au) is 2.4;

  • Cu-Pb-Zn values are consistently low with an average combined value of 72.7 ppm; and

  • Arsenic values average 8.4 ppm and most Sb values as less than 2 ppm.

Aside from gold, other metal enrichment in the various vein styles is limited making the oxide, gold-rich material exceptionally clean.

M3 Metals continues to move forward with its Plan of Operation submitted to the Bureau of Land Management ("BLM") outlining the planned drilling program and corresponding Environmental Assessment work required to get permits for the disturbance of approximately 1,000 Acres. Field work is ongoing.

Quality Assurance / Quality Control (QAQC)

Robert Johansing, Economic Geologist, M.Sc., Q.P., has been responsible for all phases of sample collection, labelling, bagging and transport from the project to Reno, where the samples were analyzed by ALS labs of Reno, Nevada Samples were then dried, crushed and split, and pulp samples were prepared for analysis. Gold was determined by fire assay with an atomic absorption spectroscopy (AAS) finish, over limit samples were determined by fire assay and gravimetric finish. Silver plus 34 other elements were determined by Aqua Regia ICP-AES, over limit samples were determined by ore grade Aquia Regia ICP-AES finish. Standard sample chain of custody procedures were employed during field work until delivery to the analytical facility.

Quality control of the sampling program includes insertion of reference standards and blanks. All sampling was done with a rock hammer and approximately 2 kg of broken, sized (<3cm) material was collected at each site. The results from the blanks and standards do not suggest any issues in the sample prep and analytical procedures.

Disclaimer

Robert Johansing, Economic Geologist, M.Sc., is a Qualified Person as defined by National Instrument 43-101 for the above-mentioned project. The QP is a Qualified Professional in good standing of Mining and Metallurgical Society of America (MMSA). Mr. Johansing has reviewed and approved the technical information disclosed above.

ABOUT M3 METALS CORP.

M3 Metals Corp. is a Canadian listed Company, focused on creating shareholder value through discoveries and strategic development of mineral properties in North America. For additional information please visit the Company's website at www.m3metalscorp.com. You may also email info@m3metalscorp.com or call investor relations at (604) 669-2279.

M3 METALS CORP.

"Adrian Smith"

Adrian Smith
President

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
This news release may contain certain "Forward-Looking Statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. When or if used in this news release, the words "anticipate", "believe", "estimate", "expect", "target, "plan", "forecast", "may", "schedule" and similar words or expressions identify forward-looking statements or information. These forward-looking statements or information may relate to future prices of commodities, accuracy of mineral or resource exploration activity, reserves or resources, regulatory or government requirements or approvals, the reliability of third party information, continued access to mineral properties or infrastructure, currency risks including the exchange rate of US$ for CDN$, changes in exploration costs and government royalties or taxes in Canada, the United States or other jurisdictions and other factors or information. Such statements represent the Company's current views with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by the Company, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Many factors, both known and unknown, could cause results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements or information to reflect changes in assumptions or changes in circumstances or any other events affections such statements and information other than as required by applicable laws, rules and regulations.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/55422

info